Cable management is often an afterthought in the specification process rather than being viewed an essential component within a building. When it comes to specifying cable management systems, there are a number of key areas to consider in addition to cost per unit and installation time. Here, Nigel Leaver, lead marketing manager for cable management at Legrand, talks through some simple top tips during specification.


1. Location

Consider what elements the cable management system will be exposed to. If the system is to be located in a corrosive environment or a marine location for example, the requirements will be very different to that of an internal commercial building installation.

2. Consider the cable used

It’s important to consider what type of cable will be used throughout the installation and if support or protection is needed.

  • Single insulated (non-sheathed) cables require additional mechanical protection, as well as support, and therefore a distribution trunking system is generally the solution of choice as it fully encases the cables.
  • If using armoured cables, an open cable management system, such as wire tray, perforated tray or cable ladder, is considered more suitable.

3. Weight

Calculate the total weight to be supported by the cable management system, taking into consideration current requirements and potential needs in the future.

Remember that the total loading should be calculated based on not only the weight of the cables, but also any ancillary items that are subsequently fitted to the cable management system, such as light fittings.

4. Regulations and Standards

Wiring regulations can differ depending on the installation or location of the project you’re working on, so it’s imperative to monitor and review the guidelines, prior to an installation.  

Compliance to IP4X or IPXXD for example, when specifying a trunking system that could contain non-sheathed cables, must be considered. Both aim to provide mechanical protection from solid objects and prevent disruption of contained cables.

5. Scalability

It can be tempting to build in redundant capacity during the design and specification stages of a project rather than designing a system that can be easily adapted in the future. Planning ahead has the potential to save businesses time and money in the longer term, so it’s worth considering in the design stages.

Remember, when considering scalability, retrofitting can be expensive and not all systems can be easily integrated with one another. Consider this at the design stage by specifying a system that can easily interface with others.

6. Full range of acessories

Take the time to specify a system that offers a full range of accessories including brackets, fixings and couplers, from one source. Work with your supplier to ensure you specify the correct amount of fittings, brackets and fixings in order to prevent delays on site.

Although cable management is often viewed as an afterthought, it can help to enhance cable performance, longevity and future flexibility in terms of business growth if implemented effectively. There isn’t a “one solution fits all”, so it is vitally important that the correct system is chosen from the outset. By selecting a cable management system that excels in each of these areas, you will not only have a system that reduces installation time, and therefore total installed cost, but you will also have a system that can meet your needs today and tomorrow.


For more information on Legrand’s range of cable management solutions please visit or call 0345 605 4333.